net/http

golang net/http Server主要流程源码分析。

时间：2019年3月14日

处理一个http请求大致思路如下：

• 创建一个net.Listener对象
• net.Listener对象Accept一个tcp连接
• 从tcp连接读取一个请求并创建一个响应体
• 调用接口处理这个连接的请求并写入数据udao响应

主要堆栈:

http.ListenAndServe(addr string, handler Handler) error

    http.*Server.ListenAndServe() error

        net.Listen(network, address string) (net.Listener, error)

        http.*Server.Serve(l net.Listener) error

            http.*Server.setupHTTP2_Serve()

            net.Listener.Accept() (net.Conn, error)

            http.*Server.newConn(rwc net.Conn) *http.conn

            http.*conn.setState(nc net.Conn, state ConnState)

            http.*conn.serve(ctx context.Context)

                defer http.*conn.serve.func()

                http.*conn.rwc.(*tls.Conn)

                    tls.*Conn.Handshake()

                    tls.ConnectionState.NegotiatedProtocol

                http.*conn.readRequest(ctx context.Context) (w *http.response, err error)

                http.serverHandler{http.*conn.server}.ServeHTTP(w, w.req)

Start

启动一个Server

package main

import "fmt"
import "net/http"

func main() {
    http.HandleFunc("/bar", func(w http.ResponseWriter, r *http.Request) {
        fmt.Fprintf(w, "Hello, %q", r.URL.Path)
    })

    http.ListenAndServe(":8080", nil)
}

http.ListenAndServe

首先http.ListenAndServe会创建一个Server，设置地址和Handler，然后调用Server对象的ListenAndServe方法启动。

ListenAndServe方法先检查srv的状态是否是关闭，服务是关闭的就直接退出

然后设置默认地址，利用地址监听tcp连接，最后调用Server对象的Serve的方法，处理这个监听。

// ListenAndServe listens on the TCP network address addr and then calls
// Serve with handler to handle requests on incoming connections.
// Accepted connections are configured to enable TCP keep-alives.
//
// The handler is typically nil, in which case the DefaultServeMux is used.
//
// ListenAndServe always returns a non-nil error.
func ListenAndServe(addr string, handler Handler) error {
    server := &Server{Addr: addr, Handler: handler}
    return server.ListenAndServe()
}

func (srv *Server) ListenAndServe() error {
    if srv.shuttingDown() {
        return ErrServerClosed
    }
    addr := srv.Addr
    if addr == "" {
        addr = ":http"
    }
    ln, err := net.Listen("tcp", addr)
    if err != nil {
        return err
    }
    return srv.Serve(tcpKeepAliveListener{ln.(*net.TCPListener)})

Serve

Server对象的Serve方法才是处理个监听的主要过程，启动顺序函数如下：

testHookServerServe执行net/http库默认的测试函数。

    if fn := testHookServerServe; fn != nil {
        fn(srv, l) // call hook with unwrapped listener
    }

onceCloseListener对象封装net.Listener对象的Close方法，使用sync.Once对象确保net.Listener只会关闭一次。

    l = &onceCloseListener{Listener: l}
    defer l.Close()

setupHTTP2_Serve设置http2，如果启用了https默认就是http2，h2可以使用环境变量设置是否启动，具体不分析。

    if err := srv.setupHTTP2_Serve(); err != nil {
        return err
    }

trackListener设置track日志，忽略。

    if !srv.trackListener(&l, true) {
        return ErrServerClosed
    }
    defer srv.trackListener(&l, false)

baseCtx是Server一个监听的根Context。

    baseCtx := context.Background() // base is always background, per Issue 16220
    ctx := context.WithValue(baseCtx, ServerContextKey, srv)

for循环处理Accept到的连接。

    for {
        rw, e := l.Accept()
        ...
    }

如果Accept返回err，会srv.getDoneChan()方法检测Server是否结束，后序忽略。

        if e != nil {
            select {
            case <-srv.getDoneChan():
                return ErrServerClosed
            default:
            }
            if ne, ok := e.(net.Error); ok && ne.Temporary() {
                if tempDelay == 0 {
                    tempDelay = 5 * time.Millisecond
                } else {
                    tempDelay *= 2
                }
                if max := 1 * time.Second; tempDelay > max {
                    tempDelay = max
                }
                srv.logf("http: Accept error: %v; retrying in %v", e, tempDelay)
                time.Sleep(tempDelay)
                continue
            }
            return e
        }

Accept获得了一个net.Conn连接对象，使用srv.newConn方法创建一个http.conn连接。

http.conn连接就是http连接，设置连接状态用于连接复用，然后c.serve处理这个http连接。

        c := srv.newConn(rw)
        c.setState(c.rwc, StateNew) // before Serve can return
        go c.serve(ctx)

http.Server.Serve完整源码如下：

func (srv *Server) Serve(l net.Listener) error {
    if fn := testHookServerServe; fn != nil {
        fn(srv, l) // call hook with unwrapped listener
    }

    l = &onceCloseListener{Listener: l}
    defer l.Close()

    if err := srv.setupHTTP2_Serve(); err != nil {
        return err
    }

    if !srv.trackListener(&l, true) {
        return ErrServerClosed
    }
    defer srv.trackListener(&l, false)

    var tempDelay time.Duration     // how long to sleep on accept failure
    baseCtx := context.Background() // base is always background, per Issue 16220
    ctx := context.WithValue(baseCtx, ServerContextKey, srv)
    for {
        rw, e := l.Accept()
        if e != nil {
            select {
            case <-srv.getDoneChan():
                return ErrServerClosed
            default:
            }
            if ne, ok := e.(net.Error); ok && ne.Temporary() {
                if tempDelay == 0 {
                    tempDelay = 5 * time.Millisecond
                } else {
                    tempDelay *= 2
                }
                if max := 1 * time.Second; tempDelay > max {
                    tempDelay = max
                }
                srv.logf("http: Accept error: %v; retrying in %v", e, tempDelay)
                time.Sleep(tempDelay)
                continue
            }
            return e
        }
        tempDelay = 0
        c := srv.newConn(rw)
        c.setState(c.rwc, StateNew) // before Serve can return
        go c.serve(ctx)
    }
}

net.conn.serve

net.conn.serve处理一个http连接。

WithValue设置Context，忽略。

    c.remoteAddr = c.rwc.RemoteAddr().String()
    ctx = context.WithValue(ctx, LocalAddrContextKey, c.rwc.LocalAddr())

defer部分捕捉panic抛出的错误，然后Server对象输出，如果Server对象设置了log.Logger，就输出到log，否则输出到默认。

    defer func() {
        if err := recover(); err != nil && err != ErrAbortHandler {
            const size = 64 << 10
            buf := make([]byte, size)
            buf = buf[:runtime.Stack(buf, false)]
            c.server.logf("http: panic serving %v: %v\n%s", c.remoteAddr, err, buf)
        }
        ...
    }()

defer后部分，检测http连接的状态，非劫持状态就关闭连接，设置http状态成关闭；劫持状态一般在Websock下，使用Hijack方法获取了tcp连接，然后自定义处理。

        if !c.hijacked() {
            c.close()
            c.setState(c.rwc, StateClosed)
        }

c.rwc就是net.Conn的连接，net.Conn实现了Reader、Writer、Closer接口，所以缩写rwc。

rwc连接断言判断是否是tls.Conn连接，判断是否是https连接；如果是就设置rwc的超时，

    if tlsConn, ok := c.rwc.(*tls.Conn); ok {
        if d := c.server.ReadTimeout; d != 0 {
            c.rwc.SetReadDeadline(time.Now().Add(d))
        }
        if d := c.server.WriteTimeout; d != 0 {
            c.rwc.SetWriteDeadline(time.Now().Add(d))
        }
        ...
    }

tlsConn.Handshake()是检测tls握手是否正常，不正常就返回http 400的响应并关闭连接；

        if err := tlsConn.Handshake(); err != nil {
            // If the handshake failed due to the client not speaking
            // TLS, assume they're speaking plaintext HTTP and write a
            // 400 response on the TLS conn's underlying net.Conn.
            if re, ok := err.(tls.RecordHeaderError); ok && re.Conn != nil && tlsRecordHeaderLooksLikeHTTP(re.RecordHeader) {
                io.WriteString(re.Conn, "HTTP/1.0 400 Bad Request\r\n\r\nClient sent an HTTP request to an HTTPS server.\n")
                re.Conn.Close()
                return
            }
            c.server.logf("http: TLS handshake error from %s: %v", c.rwc.RemoteAddr(), err)
            return
        }

获取NegotiatedProtocol信息，就是NextProto的值，如果值是h2，就使用h2的连接处理；h2详细见h2握手分析，此tls部分可忽略,是tls的ALPN扩展的支持。

        c.tlsState = new(tls.ConnectionState)
        *c.tlsState = tlsConn.ConnectionState()
        if proto := c.tlsState.NegotiatedProtocol; validNPN(proto) {
            if fn := c.server.TLSNextProto[proto]; fn != nil {
                h := initNPNRequest{tlsConn, serverHandler{c.server}}
                fn(c.server, tlsConn, h)
            }
            return
        }

注意：tlsConn.Handshake()一定要执行，是验证tls握手，然后才会有NegotiatedProtocol等tls连接信息。

注意：NegotiatedProtocol是tls的ALPN扩展的关键，h2协议握手下的值就是h2

tls部分完整如下：

    if tlsConn, ok := c.rwc.(*tls.Conn); ok {
        if d := c.server.ReadTimeout; d != 0 {
            c.rwc.SetReadDeadline(time.Now().Add(d))
        }
        if d := c.server.WriteTimeout; d != 0 {
            c.rwc.SetWriteDeadline(time.Now().Add(d))
        }
        if err := tlsConn.Handshake(); err != nil {
            // If the handshake failed due to the client not speaking
            // TLS, assume they're speaking plaintext HTTP and write a
            // 400 response on the TLS conn's underlying net.Conn.
            if re, ok := err.(tls.RecordHeaderError); ok && re.Conn != nil && tlsRecordHeaderLooksLikeHTTP(re.RecordHeader) {
                io.WriteString(re.Conn, "HTTP/1.0 400 Bad Request\r\n\r\nClient sent an HTTP request to an HTTPS server.\n")
                re.Conn.Close()
                return
            }
            c.server.logf("http: TLS handshake error from %s: %v", c.rwc.RemoteAddr(), err)
            return
        }
        c.tlsState = new(tls.ConnectionState)
        *c.tlsState = tlsConn.ConnectionState()
        if proto := c.tlsState.NegotiatedProtocol; validNPN(proto) {
            if fn := c.server.TLSNextProto[proto]; fn != nil {
                h := initNPNRequest{tlsConn, serverHandler{c.server}}
                fn(c.server, tlsConn, h)
            }
            return
        }
    }

tls部分没将请求变成h2就继续按http/1.1处理请求。

newBufioReader部分对rwc，使用bufio变成缓冲读写。

    // HTTP/1.x from here on.

    ctx, cancelCtx := context.WithCancel(ctx)
    c.cancelCtx = cancelCtx
    defer cancelCtx()

    c.r = &connReader{conn: c}
    c.bufr = newBufioReader(c.r)
    c.bufw = newBufioWriterSize(checkConnErrorWriter{c}, 4<<10)

然后for循环调用net.conn.readRequest读取一个请求，并创建ResponseWriter对象。

    for {
        w, err := c.readRequest(ctx)
        ...
    }

如果读取请求错误，就直接返回4xx错误响应并关闭连接。

        if err != nil {
            const errorHeaders = "\r\nContent-Type: text/plain; charset=utf-8\r\nConnection: close\r\n\r\n"

            if err == errTooLarge {
                // Their HTTP client may or may not be
                // able to read this if we're
                // responding to them and hanging up
                // while they're still writing their
                // request. Undefined behavior.
                const publicErr = "431 Request Header Fields Too Large"
                fmt.Fprintf(c.rwc, "HTTP/1.1 "+publicErr+errorHeaders+publicErr)
                c.closeWriteAndWait()
                return
            }
            if isCommonNetReadError(err) {
                return // don't reply
            }

            publicErr := "400 Bad Request"
            if v, ok := err.(badRequestError); ok {
                publicErr = publicErr + ": " + string(v)
            }

            fmt.Fprintf(c.rwc, "HTTP/1.1 "+publicErr+errorHeaders+publicErr)
            return
        }

        // Expect 100 Continue support
        req := w.req
        if req.expectsContinue() {
            if req.ProtoAtLeast(1, 1) && req.ContentLength != 0 {
                // Wrap the Body reader with one that replies on the connection
                req.Body = &expectContinueReader{readCloser: req.Body, resp: w}
            }
        } else if req.Header.get("Expect") != "" {
            w.sendExpectationFailed()
            return
        }

        c.curReq.Store(w)

        if requestBodyRemains(req.Body) {
            registerOnHitEOF(req.Body, w.conn.r.startBackgroundRead)
        } else {
            w.conn.r.startBackgroundRead()
        }

创建一个serverHandler处理当前的请求rw，serverHandler就检测Server是否设置了默认处理者，和响应Option方法，可忽略。

然后判断连接状态是否劫持，劫持直接结束。

...

注意：serverHandler{c.server}.ServeHTTP(w, w.req)，就是用连接先创建request和response对象，然使用http.Handler对象来处理这个请求。

        // HTTP cannot have multiple simultaneous active requests.[*]
        // Until the server replies to this request, it can't read another,
        // so we might as well run the handler in this goroutine.
        // [*] Not strictly true: HTTP pipelining. We could let them all process
        // in parallel even if their responses need to be serialized.
        // But we're not going to implement HTTP pipelining because it
        // was never deployed in the wild and the answer is HTTP/2.
        serverHandler{c.server}.ServeHTTP(w, w.req)
        w.cancelCtx()
        if c.hijacked() {
            return
        }
        w.finishRequest()
        if !w.shouldReuseConnection() {
            if w.requestBodyLimitHit || w.closedRequestBodyEarly() {
                c.closeWriteAndWait()
            }
            return
        }
        c.setState(c.rwc, StateIdle)
        c.curReq.Store((*response)(nil))

http.serverHandler定义:

// serverHandler delegates to either the server's Handler or
// DefaultServeMux and also handles "OPTIONS *" requests.
type serverHandler struct {
    srv *Server
}

func (sh serverHandler) ServeHTTP(rw ResponseWriter, req *Request) {
    handler := sh.srv.Handler
    if handler == nil {
        handler = DefaultServeMux
    }
    if req.RequestURI == "*" && req.Method == "OPTIONS" {
        handler = globalOptionsHandler{}
    }
    handler.ServeHTTP(rw, req)
}

...

        if !w.conn.server.doKeepAlives() {
            // We're in shutdown mode. We might've replied
            // to the user without "Connection: close" and
            // they might think they can send another
            // request, but such is life with HTTP/1.1.
            return
        }

        if d := c.server.idleTimeout(); d != 0 {
            c.rwc.SetReadDeadline(time.Now().Add(d))
            if _, err := c.bufr.Peek(4); err != nil {
                return
            }
        }
        c.rwc.SetReadDeadline(time.Time{})

net.conn.serve完整定义如下：

// Serve a new connection.
func (c *conn) serve(ctx context.Context) {
    c.remoteAddr = c.rwc.RemoteAddr().String()
    ctx = context.WithValue(ctx, LocalAddrContextKey, c.rwc.LocalAddr())
    defer func() {
        if err := recover(); err != nil && err != ErrAbortHandler {
            const size = 64 << 10
            buf := make([]byte, size)
            buf = buf[:runtime.Stack(buf, false)]
            c.server.logf("http: panic serving %v: %v\n%s", c.remoteAddr, err, buf)
        }
        if !c.hijacked() {
            c.close()
            c.setState(c.rwc, StateClosed)
        }
    }()

    if tlsConn, ok := c.rwc.(*tls.Conn); ok {
        if d := c.server.ReadTimeout; d != 0 {
            c.rwc.SetReadDeadline(time.Now().Add(d))
        }
        if d := c.server.WriteTimeout; d != 0 {
            c.rwc.SetWriteDeadline(time.Now().Add(d))
        }
        if err := tlsConn.Handshake(); err != nil {
            // If the handshake failed due to the client not speaking
            // TLS, assume they're speaking plaintext HTTP and write a
            // 400 response on the TLS conn's underlying net.Conn.
            if re, ok := err.(tls.RecordHeaderError); ok && re.Conn != nil && tlsRecordHeaderLooksLikeHTTP(re.RecordHeader) {
                io.WriteString(re.Conn, "HTTP/1.0 400 Bad Request\r\n\r\nClient sent an HTTP request to an HTTPS server.\n")
                re.Conn.Close()
                return
            }
            c.server.logf("http: TLS handshake error from %s: %v", c.rwc.RemoteAddr(), err)
            return
        }
        c.tlsState = new(tls.ConnectionState)
        *c.tlsState = tlsConn.ConnectionState()
        if proto := c.tlsState.NegotiatedProtocol; validNPN(proto) {
            if fn := c.server.TLSNextProto[proto]; fn != nil {
                h := initNPNRequest{tlsConn, serverHandler{c.server}}
                fn(c.server, tlsConn, h)
            }
            return
        }
    }

    // HTTP/1.x from here on.

    ctx, cancelCtx := context.WithCancel(ctx)
    c.cancelCtx = cancelCtx
    defer cancelCtx()

    c.r = &connReader{conn: c}
    c.bufr = newBufioReader(c.r)
    c.bufw = newBufioWriterSize(checkConnErrorWriter{c}, 4<<10)

    for {
        w, err := c.readRequest(ctx)
        if c.r.remain != c.server.initialReadLimitSize() {
            // If we read any bytes off the wire, we're active.
            c.setState(c.rwc, StateActive)
        }
        if err != nil {
            const errorHeaders = "\r\nContent-Type: text/plain; charset=utf-8\r\nConnection: close\r\n\r\n"

            if err == errTooLarge {
                // Their HTTP client may or may not be
                // able to read this if we're
                // responding to them and hanging up
                // while they're still writing their
                // request. Undefined behavior.
                const publicErr = "431 Request Header Fields Too Large"
                fmt.Fprintf(c.rwc, "HTTP/1.1 "+publicErr+errorHeaders+publicErr)
                c.closeWriteAndWait()
                return
            }
            if isCommonNetReadError(err) {
                return // don't reply
            }

            publicErr := "400 Bad Request"
            if v, ok := err.(badRequestError); ok {
                publicErr = publicErr + ": " + string(v)
            }

            fmt.Fprintf(c.rwc, "HTTP/1.1 "+publicErr+errorHeaders+publicErr)
            return
        }

        // Expect 100 Continue support
        req := w.req
        if req.expectsContinue() {
            if req.ProtoAtLeast(1, 1) && req.ContentLength != 0 {
                // Wrap the Body reader with one that replies on the connection
                req.Body = &expectContinueReader{readCloser: req.Body, resp: w}
            }
        } else if req.Header.get("Expect") != "" {
            w.sendExpectationFailed()
            return
        }

        c.curReq.Store(w)

        if requestBodyRemains(req.Body) {
            registerOnHitEOF(req.Body, w.conn.r.startBackgroundRead)
        } else {
            w.conn.r.startBackgroundRead()
        }

        // HTTP cannot have multiple simultaneous active requests.[*]
        // Until the server replies to this request, it can't read another,
        // so we might as well run the handler in this goroutine.
        // [*] Not strictly true: HTTP pipelining. We could let them all process
        // in parallel even if their responses need to be serialized.
        // But we're not going to implement HTTP pipelining because it
        // was never deployed in the wild and the answer is HTTP/2.
        serverHandler{c.server}.ServeHTTP(w, w.req)
        w.cancelCtx()
        if c.hijacked() {
            return
        }
        w.finishRequest()
        if !w.shouldReuseConnection() {
            if w.requestBodyLimitHit || w.closedRequestBodyEarly() {
                c.closeWriteAndWait()
            }
            return
        }
        c.setState(c.rwc, StateIdle)
        c.curReq.Store((*response)(nil))

        if !w.conn.server.doKeepAlives() {
            // We're in shutdown mode. We might've replied
            // to the user without "Connection: close" and
            // they might think they can send another
            // request, but such is life with HTTP/1.1.
            return
        }

        if d := c.server.idleTimeout(); d != 0 {
            c.rwc.SetReadDeadline(time.Now().Add(d))
            if _, err := c.bufr.Peek(4); err != nil {
                return
            }
        }
        c.rwc.SetReadDeadline(time.Time{})
    }
}

net.conn.readRequest

readRequest方法就是根据连接创建http.Request和http.ResponseWriter两个对象供http.Handler接口使用，处理一个请求。

end

创建一个Server并处理http请求到此就结束。

反馈和交流请加群组：QQ群373278915。